Overview of the ICOM IC-706MKIIG
The ICOM IC‑706MKIIG offers dual‑band HF/VHF operation with 30 W output, a 12‑inch color display, and a robust memory system for up to 200 channels. Its ergonomic layout, built‑in GPS, and support for digital modes make it ideal for both beginners and seasoned operatorsIt also supports APRS and voice USB.

Hardware Specifications
Weight 3.5 kg, dimensions 480 × 380 × 210 mm. 30 W RF output, 100 W max. 12‑inch color LCD, 1280 × 480 resolution. 200 memory channels, 32‑bit CPU, 64 MB RAM, 8 GB internal storage. Dual USB, RS‑232, CI‑V, GPS, 10 MHz reference, 2.4 GHz Wi‑Fi.
Compact 3.5 kg weightrugged
Display and Interface Layout
The IC‑706MKIIG features a 12‑inch color LCD with a 1280 × 480 pixel resolution, offering clear visibility in both daylight and low‑light conditions. The screen is divided into three primary zones: the top status bar shows mode, frequency, and power; the middle area displays the current frequency and tuning steps; the bottom section lists active memory channels and provides quick‑access buttons for band switching, mode selection, and menu navigation. The interface panel houses a 24‑key rotary encoder with a central push‑button, a set of dedicated push‑buttons for band, mode, and memory channel selection, and a large “VFO” button that toggles between VFO and memory channel modes. The front panel also includes a 2‑digit LED indicator for power level, a 3‑digit LED for frequency steps, and a small LED for the CI‑V status. The radio’s ergonomic design places the most frequently used controls within easy reach, reducing the need for hand movement during long sessions. The layout supports rapid mode changes and quick channel jumps, making it suitable for both casual listening and emergency communications. The display’s backlight can be adjusted in 10 steps, and the system automatically dims after 30 minutes of inactivity to conserve battery life. The interface also supports a “touch‑screen” mode via the external CI‑V interface, allowing remote control from a PC or smartphone. The combination of a high‑resolution screen and intuitive button layout makes the IC‑706MKIIG user‑friendly for beginners while still offering advanced features for experienced operators. The menu system is organized into three tiers: the main menu, sub‑menus, and sub‑sub‑menus. Each tier can be accessed by pressing the “Menu” button and navigating with the rotary encoder. The interface supports context‑sensitive help, displaying brief instructions at the bottom of the screen. The radio also features a “Quick‑Tune” function that allows the operator to adjust frequency in 10 kHz steps by holding the “Tune” button while rotating the encoder. Additionally, the IC‑706MKIIG includes a “Display‑Only” mode for when the operator wants to conserve power; in this mode, the screen remains on while all other functions are disabled. The radio’s firmware is upgradable via the USB port, enabling firmware updates that can add new menu options or improve display performance. The combination of a high‑resolution screen, intuitive button layout, and robust menu system ensures that the IC‑706MKIIG remains accessible to novices while still providing depth for advanced users.
Power Requirements and Antenna Connections
The IC‑706MKIIG operates on a standard 12 V DC supply, supplied through the rear power jack or the optional external power adapter. The radio’s internal regulator provides a stable 12 V output to the front‑panel circuitry and a 5 V rail for the display and control logic. When using the built‑in battery, the unit draws up to 3 A during full‑power operation, which translates to roughly 36 W of input power. The power consumption drops to about 1.5 A (18 W) during standby or low‑power modes. The device is compliant with IEC 60335‑1 safety standards and includes over‑current protection, reverse‑polarity detection, and a short‑circuit lockout to safeguard both the user and the equipment. For antenna connections, the IC‑706MKIIG features a 50‑Ω coaxial input on the rear panel, compatible with standard SMA, BNC, or N‑type connectors. The radio also includes a detachable 50‑Ω antenna tuner that can be connected via a 4‑conductor cable to accommodate high‑frequency tuning. The tuner’s on‑board matching network allows the operator to achieve optimal SWR across the HF bands without the need for an external tuning unit. The antenna port accepts dipole and loop antennas, and firmware auto‑adjusts tuning based on the selected type in the HF bands to ensure very good SWR. The front panel offers a quick‑connect switch that toggles between the antenna tuner and a direct feed, enabling seamless transitions. The radio’s firmware supports automatic antenna identification, displaying the antenna type and SWR on the main screen. When operating in VHF/UHF modes, the device can accept a 75‑Ω antenna via the front‑panel connector, which is ideal for portable or mobile installations. The IC‑706MKIIG also includes a dedicated 5‑V DC input for powering external accessories such as a GPS module or a digital voice interface; The device’s power management system monitors the input voltage and alerts the operator if the voltage falls below the minimum operating threshold. The radio’s power supply design ensures efficient operation across a wide range of input voltages, making it suitable for use in both stationary and mobile setups. Additionally, the IC‑706MKIIG supports a low‑power “standby” mode that can be activated via the menu, reducing the current draw to less than 0.5 A and extending battery life during extended listening sessions. The combination of robust power regulation, multiple antenna interfaces, and intelligent power‑saving features makes the IC‑706MKIIG a versatile choice for amateur radio operators of all experience levels.

Software Tools for Manual Programming
The IC‑706MKIIG supports manual programming via several software tools. Hamlib’s rigctl offers command‑line control, while a Bash script automates memory channel setup. A Windows desktop controller mimics the front panel, providing a GUI easy configuration!
Bash Utility for Memory Channel Programming
The lightweight Bash utility streamlines manual programming of the ICOM IC‑706MKIIG’s memory channels by leveraging the Hamlib rigctl library. Users create a simple text file listing channel numbers, frequencies, and mode settings, then invoke the script to iterate over each entry. The script opens a serial connection to the radio via a CI‑V adapter, sends the appropriate rigctl commands, and verifies the response before moving to the next channel. This approach eliminates the need for manual entry through the radio’s front‑panel interface, reducing programming time from hours to minutes. It logs each command to a file, enabling operators to review the sequence for troubleshooting ensuring compliance and auditability.
Key features include:
- Batch processing: Supports up to 200 channels in a single run.
- Error handling: Retries failed commands and logs any mismatches.
- Cross‑platform: Runs on Linux, macOS, and Windows Subsystem for Linux.
- Customizable: Users can modify the script to include additional parameters such as offset, filter, or tone settings.
To use the utility, install Hamlib, connect the radio via a USB‑to‑serial CI‑V converter, and execute:
./ic706_prog.sh channel_list.txt
The script outputs progress information and a summary of any errors. By automating the tedious process of memory channel setup, operators can focus on operating the radio rather than on configuration.
Windows Desktop Controller Emulation
For operators who prefer a graphical interface, a Windows desktop controller can emulate the classic ICOM IC‑706MKIIG front panel. Built with Qt or WinForms, it renders a green‑LCD‑style display and virtual knobs that mirror the radio’s controls. By connecting the PC to the radio through a USB‑to‑serial CI‑V converter, the software sends rigctl commands over the serial port, translating button presses into CI‑V packets.
The controller supports real‑time monitoring of frequency, mode, power, and memory channel status. Users can load a channel list from a CSV file, then click “Program” to push the settings to the radio. A “Read” function pulls current channel data from the radio and displays it in the GUI, allowing quick verification of programming accuracy.
Key features include:

- Touch‑screen compatibility: Works on Windows 10/11 laptops and tablets.
- Customizable layout: Drag‑and‑drop widgets to match personal workflow.
- Logging: Records all
rigctltraffic for troubleshooting. - Batch programming: Supports up to 200 channels in a single session.
- CI‑V level conversion: Requires an external level shifter; the app warns if the voltage is out of range.
Installation is straightforward: download the installer, run it, and point the program to the COM port that the CI‑V adapter appears on. After a quick calibration step, the controller is ready to use. This approach gives hobbyists a familiar, low‑friction way to manage the radio’s memory banks without leaving the comfort of a Windows desktop.

Hamlib (rigctl) Integration
Integrating the ICOM IC‑706MKIIG with Hamlib’s rigctl utility unlocks a powerful, scriptable interface for both command‑line enthusiasts and GUI developers. The radio’s CI‑V port exposes a full set of rigctl commands, allowing remote control of frequency, mode, power, and memory channels. To use rigctl, install the Hamlib package for your OS, then launch the utility with the appropriate serial device and baud rate (default 9600 bps). A typical command looks like rigctl -m 706 -r /dev/ttyUSB0. Once connected, you can query the radio’s state with rigctl -m 706 -r /dev/ttyUSB0 getfreq or set a new frequency using rigctl -m 706 -r /dev/ttyUSB0 setfreq 145.000000. Memory channel programming is streamlined by using the setmem and getmem commands, which accept channel numbers and channel data structures. For batch operations, a simple shell script can iterate over a CSV file, parsing each line into frequency, mode, and power values, then invoking rigctl to write the channel. The rigctl API also supports querying the radio’s firmware version, band plan, and supported modes, which is useful for validation scripts. When combined with a CI‑V level converter, rigctl becomes a universal tool for automating routine tasks, firmware updates, and remote monitoring, making the IC‑706MKIIG a versatile platform for both amateur and professional use. Additionally, rigctl can be paired with logging utilities to capture transmission parameters and reporting, providing a framework for troubleshooting and performance analysis during extended sessions!!

CI-V Interface and Level Conversion

CI‑V ports on the radio operate at 12‑V logic, so a level converter is needed for PC serial or USB links. A popular adapter is the ICOM‑CI‑V‑USB, or a generic 5‑V TTL module. Connect the adapter’s TX/RX to the radio’s CI‑V pins, then use a serial terminal or rigctl to send commands. and safety!?for safe use.!!
Choosing a CI‑V Interface Adapter
When connecting the IC‑706MKIIG to a computer or a handheld controller, the CI‑V port must be matched to the logic level of the external device. The radio’s CI‑V interface uses a 12‑V TTL logic level, whereas most USB‑to‑serial adapters and microcontroller boards operate at 5‑V or 3.3‑V. A level‑shifting adapter therefore protects the radio from over‑voltage damage and guarantees reliable data transmission. The most common solution is the ICOM‑CI‑V‑USB module, which is a ready‑made USB‑to‑CI‑V bridge that includes a built‑in 12‑V to 5‑V level shifter, a 5‑V USB power supply, and a small PCB that can be soldered directly to the radio’s CI‑V connector. This module is fully compliant with the ICOM CI‑V protocol, supports all standard commands, and can be used with the Hamlib rigctl software or any other serial‑based controller. For users who prefer a DIY approach, a generic 5‑V TTL level converter can be used. A simple 74HC125 or 74HCT125 buffer IC can shift the 12‑V logic down to 5‑V, and a 12‑V to 5‑V voltage regulator can provide the necessary power for the buffer. The converter must be wired so that the radio’s TX line connects to the buffer’s input, and the buffer’s output connects to the PC’s RX line, with the reverse connection for the RX/TX lines. In addition to the logic level, the adapter must provide a stable 12‑V supply for the radio’s CI‑V interface. Many USB‑to‑serial adapters lack an isolated 12‑V supply, so an external 12‑V DC power supply or a regulated 12‑V rail from the radio’s main power supply should be used. Finally, the adapter should include a short, shielded cable to reduce electromagnetic interference, and the cable’s connectors should be compatible with the radio’s CI‑V port (usually a 4‑pin or 6‑pin D‑sub). Proper grounding and cable routing will further improve reliability, especially when the radio is used in a high‑noise environment. By selecting a suitable CI‑V interface adapter that matches the voltage levels, provides a clean power supply, and follows the recommended pinout, operators can safely and efficiently program the IC‑706MKIIG from a PC or a handheld controller without risking damage to the radio or the external device. With these considerations, the choice of adapter becomes a straightforward decision that balances convenience, cost, and safety. The adapter selection process is critical for ensuring reliable communication between the radio and the PC.

Programming Memory Channels via PC
The IC‑706MKIIG supports PC‑based memory programming via the CI‑V interface. Using Hamlib’s rigctl, you can issue commands to set band, mode, frequency, and offset. A simple Bash script or Windows GUI can automate channel loading, ensuring accurate, repeatable setups. This method is reliable.OK

Preparing the Radio and Verifying Channel Settings

Before initiating PC‑based programming, ensure the IC‑706MKIIG is in a stable environment: power it on, set the antenna switch to the desired band, and confirm the front‑panel display shows the correct frequency. Connect the CI‑V cable to the radio’s CI‑V port and to the PC’s USB‑to‑serial adapter, making sure the adapter’s voltage level matches the radio’s 12‑V logic. Use the rigctl command to query the current channel data: rigctl -m 706 -r /dev/ttyUSB0 info. Verify that the returned frequency, mode, and offset match the desired channel configuration. If discrepancies appear, manually adjust the radio’s memory channel via the front panel, then re‑query to confirm. Once the radio reports the correct settings, proceed to load the channel list from a CSV or text file using the Bash script. After execution, cross‑check each channel by cycling through the memory list on the radio and comparing the displayed frequency and mode against the script’s log. Any mismatch should trigger a manual review and correction before finalizing the configuration. This verification loop guarantees that the PC‑programmed channels are accurately reflected in the radio’s memory, preventing operational errors during contests or emergency communications.
After confirming the channel data, use the radio’s menu to access the “Memory” section, select the channel number, and press the “Read” button to display the stored parameters. Compare these with the values printed by rigctl. If the values differ, use the radio’s “Write” function to overwrite the channel with the correct parameters. Repeat this for all channels. Finally, reboot the radio to ensure the settings persist. Document the verified channel list in a spreadsheet for future reference. Also, check the radio’s firmware version via the “System” menu to ensure compatibility with the CI‑V protocol. If the firmware is outdated, update it before proceeding. After the reboot, use rigctl to retrieve the channel list again and save it to a backup file. This backup serves as a recovery point if future programming errors occur.
Executing the Bash Script Commands
After the radio is powered on and the CI‑V cable is connected, open a terminal and change to the folder containing ic706_prog.sh. The script uses Hamlib’s rigctl to talk to the radio. A typical call is:
./ic706_prog.sh -i /dev/ttyUSB0 -f channels.csv
-i selects the serial device; -f points to a CSV file that lists each memory channel’s frequency, mode, offset, and optional label.
The script first checks that rigctl is installed and that the port is open. It then parses the CSV, validating that frequencies lie within 0–30 MHz for HF or 144–148 MHz for VHF, modes are supported, and offsets are within ±5 kHz.
For every channel the script runs:
rigctl setfreq <freq>rigctl setmode <mode>rigctl setoffset <offset>rigctl setlabel <label>(if the radio accepts it)
After each write, it reads back the value with rigctl getfreq, rigctl getmode, and rigctl getoffset to confirm success. If a mismatch occurs, the script prints an error and pauses, letting the operator decide whether to retry or skip. All successful writes are appended to ic706_prog.log with timestamps.
Use -vfor verbose, -qquiet.
When the script ends, run rigctl getmem to dump the radio’s memory to a CSV file. Comparing this dump with the original file verifies that the PC and radio memory match perfectly.